by PoddingAlong » Wed Sep 21, 2011 6:53 pm
I'm very much a newbie and actually am getting ready just to introduce myself in the Forum so you can't take any advice I give you too strongly but:
Brakes: I had towed a utility trailer with boats, lawnmowers, etc with no brakes but when I got my little RPod, everyone seemed to want to set the brakes up "tight". Finally, I started with the adjustment to basically no brake and moved it up as I drove and stopped on a flat area and then on a hill in my subdivision. I really didn't have to use that much brake for my light RV to feel comfortable. So back off the brake adjustment and the jerkiness will stop.
Sway bars: I'm still messing with this issue myself but basically it is an issue to attach weight distribution hitches and sway bars to a vehicle that is not on a frame. I have a Highlander which is on a car chassis rather than a body on a frame so the hitch is attached to the body of the car. After much research, I've decided to use the sway bars but if I'm on level ground, I actually have no tension on the chains. So they'll help me some but hopefully also won't bend anything on the car. I've gotten so many different opinions/comments on this that there's probably no good answer but that's what I've decided to do at the moment.
Battery: can't find a switch on mine either so am disconnecting the battery when I get it home for the moment.
Good luck to both of us!