Replacing your hot water heater annode rod

Re: Replacing your hot water heater annode rod

Postby mitch5252 » Sun Dec 26, 2010 1:59 pm

..

Can you use either type in your water heater - the aluminum or that other kind? I just replaced mine a couple of months ago and ordered the aluminum one from Amazon. I thought maybe all that gunk wouldn't end up in the tank... ? ? ?

..
mitch5252
 
Posts: 9229
Joined: Fri Mar 13, 2009 5:47 pm
Location: NW TN

Re: Replacing your hot water heater annode rod

Postby retiredhappy » Sun Dec 26, 2010 3:26 pm

Mitch, you really DO want the gunk to eat up the rod. That's what saves the tank from corroding.
Karen West
Baxter, Sophie, & Bailey


..

Image
User avatar
retiredhappy
 
Posts: 4438
Joined: Sun Jul 13, 2008 9:59 pm
Location: Kerrville, Texas

Re: Replacing your hot water heater annode rod

Postby rriverstone » Sun Dec 26, 2010 3:33 pm

You have 2 choices: drain the deposits & corroded anode rod out of your tank periodically, or replace tank when it becomes corroded, instead of anode rod.
rriverstone
 
Posts: 71
Joined: Mon Dec 20, 2010 3:11 am
Location: rural NM

Re: Replacing your hot water heater annode rod

Postby mitch5252 » Sun Dec 26, 2010 3:34 pm

..

So, does the aluminum one do the job properly??? If not, I'll get another one of the other type since this aluminum one is brand new...

PS: Next time we meet, we can discuss it over icey-cold cocktails since we both will have an abundance of ice!! :mrgreen:

..
mitch5252
 
Posts: 9229
Joined: Fri Mar 13, 2009 5:47 pm
Location: NW TN

Re: Replacing your hot water heater annode rod

Postby Bethers » Sun Dec 26, 2010 4:02 pm

Mitch, I almost don't want to answer - want to wait until you and Karen are together with all that ice - but

YES - the aluminum is fine.

And for you: http://www.howtodothings.com/home-garde ... er-heaters

Just a note - that article makes a big deal about not using water from a water heater with an aluminum rod for cooking etc - should not use water from a hot water faucet for that in a home or rv - ever. Use cold water for cooking, etc. Always.
Beth
“Dare to live the life you have dreamed for yourself. Go forward and make your dreams come true.” ~ Ralph Waldo Emerson ~
"He who treasures the small things in life has found the path to true happiness"
Image
User avatar
Bethers
 
Posts: 17808
Joined: Sat Jul 12, 2008 9:00 pm
Location: Arizona

Re: Replacing your hot water heater annode rod

Postby mitch5252 » Sun Dec 26, 2010 5:02 pm

Bethers wrote:Mitch, I almost don't want to answer - want to wait until you and Karen are together with all that ice - but

YES - the aluminum is fine.

And for you: http://www.howtodothings.com/home-garde ... er-heaters

Just a note - that article makes a big deal about not using water from a water heater with an aluminum rod for cooking etc - should not use water from a hot water faucet for that in a home or rv - ever. Use cold water for cooking, etc. Always.


That's probably very good advice...never thought about it! Actually, we mostly never even light the hot water tank - water for coffee and dishes is heated on the stove. And we've never used the shower - it's so small, and I can't figure out how to leave my boobs outside the door.

..
mitch5252
 
Posts: 9229
Joined: Fri Mar 13, 2009 5:47 pm
Location: NW TN

Re: Replacing your hot water heater annode rod

Postby bikerchic777 » Mon Dec 27, 2010 10:04 pm

If the weather isn't nasty on Wednesday, workamper Ken and I plan to flush my water heater and replace the annode rod, if needed.
Linda, Rags, and Brutus full-timing it in our 2017 Winnebago Micro Mini, Thumbelina.

When life throws you a curve, lean into it!
User avatar
bikerchic777
 
Posts: 1300
Joined: Tue Jan 12, 2010 9:17 pm
Location: Keystone, SD

Re: Replacing your hot water heater annode rod

Postby Bethers » Mon Dec 27, 2010 10:58 pm

When you take it out to flush, you'll know if it needs replacing. First time I did mine - was nothing left to it. :shock: I have a feeling it was the initial one. Now, I do better - flush the tank a couple times a year - fulltimers need to do it that often. Parttimers probably could check it once a year when they do fall/winter maintenance - or whenever they do maintenance :)
Beth
“Dare to live the life you have dreamed for yourself. Go forward and make your dreams come true.” ~ Ralph Waldo Emerson ~
"He who treasures the small things in life has found the path to true happiness"
Image
User avatar
Bethers
 
Posts: 17808
Joined: Sat Jul 12, 2008 9:00 pm
Location: Arizona

Re: Replacing your hot water heater annode rod

Postby bikerchic777 » Tue Dec 28, 2010 11:40 pm

OK...UPDATE! Was talking with workampers Ken and Joe this morning. They said some water heaters don't even have an anode rod :o Ken said we should go look at my water heater to be sure. Sure enough! No anode rod :shock: We are planning to drain and rinse out the water heater tomorrow. I hope all goes well because I will need a shower! Maybe I should take one tonight, just in case ;)
Linda, Rags, and Brutus full-timing it in our 2017 Winnebago Micro Mini, Thumbelina.

When life throws you a curve, lean into it!
User avatar
bikerchic777
 
Posts: 1300
Joined: Tue Jan 12, 2010 9:17 pm
Location: Keystone, SD

Re: Replacing your hot water heater annode rod

Postby Bethers » Wed Dec 29, 2010 12:03 pm

Suburban hot water heaters use the anode rods - as posted early in this thread. The Atwood water heaters don't use them - making it even more important to keep the water heater cleaned out. I thought you said earlier yours was a Suburban?
Beth
“Dare to live the life you have dreamed for yourself. Go forward and make your dreams come true.” ~ Ralph Waldo Emerson ~
"He who treasures the small things in life has found the path to true happiness"
Image
User avatar
Bethers
 
Posts: 17808
Joined: Sat Jul 12, 2008 9:00 pm
Location: Arizona

Re: Replacing your hot water heater annode rod

Postby bikerchic777 » Wed Dec 29, 2010 5:05 pm

Sorry, Beth! No, I don't think I said which brand it is. I called Atwood today and talked to a tech. He said the water heater is aluminum so no point to even put an anode rod in. He also said they don't sell electric conversion kits. He said I would need to replace the whole water heater. No thanks! A couple of my workamper buddies and I have been commiserating about it. Workamper Ken brought over an RV accessories catalog. There are some in there, but not sure if they have a switch on them or not. We are thinking of going to Camping World or somewhere where they have one in stock and look at it. I can always still order it online to save money. There are some small shops here that would probably price match to get the business. I'm going to look again at the ones posted here on the thread. May end up putting it off and just flushing out the tank...on a nicer day ;)
Linda, Rags, and Brutus full-timing it in our 2017 Winnebago Micro Mini, Thumbelina.

When life throws you a curve, lean into it!
User avatar
bikerchic777
 
Posts: 1300
Joined: Tue Jan 12, 2010 9:17 pm
Location: Keystone, SD

Previous

Return to Maintenance/Tech Issues

Who is online

Users browsing this forum: No registered users and 2 guests

cron