Death rattle ....

Talk about anything under the sun! Just remember to be respectful of others.

Death rattle ....

Postby Getupngo » Wed Oct 28, 2009 6:45 pm

... that's how my new mechanic described a problem I have brought up with nearly every
mechanic I've taken my rig to. Between 40 mph and 45 mph the whole rig begins to
rattle and the steering wheel shakes violently. My concerns have ALWAYS been dismissed,
saying that's how the Ford chassis handles. I tell them I put new Bilsteins all the way around
and installed the Steer-Safe to address the problem, and they've told me that's all I can do.
But this new guy is the first to test-drive it and says it's NOT normal and he'll get it fixed.
I'll let you all know what it was and how much it cost to fix.

Although this guy has not met deadlines, he's doing a good job, treats me with respect and
makes sure everything is done right. And his prices are really good. Motor Sportsland told
me it would cost about $1,500 to re-seal the roof on my 29-foot Class C. Clay did it on my
35-footer for $850.

For those in Salt Lake City area, it's Clay's RV and Powersports.
Janice traveling solo in a 2008 Four Winds Windsport
Navigator: Annie the miniature poodle
2011 Honda CRV toad

Image
User avatar
Getupngo
 
Posts: 2131
Joined: Sat Jul 19, 2008 12:01 pm
Location: St. George, UT

Re: Death rattle ....

Postby avalen » Wed Oct 28, 2009 6:58 pm

Hope the fix goes well and doesn't cost tooooooo much
Somewhere with Ava and Maggie
Image
User avatar
avalen
 
Posts: 9430
Joined: Mon Jul 14, 2008 5:13 pm
Location: Apache Junction Arizona

Re: Death rattle ....

Postby mitch5252 » Wed Oct 28, 2009 7:09 pm

..

Good luck, Janice, for an easy fix!!!

..
mitch5252
 
Posts: 9229
Joined: Fri Mar 13, 2009 5:47 pm
Location: NW TN

Re: Death rattle ....

Postby Cedar518 » Wed Oct 28, 2009 7:14 pm

I guess whether it's a house or a camper there is always maintenance work to do. good luck with the death rattle ! :o
Cedar518
 

Re: Death rattle ....

Postby Mrssissy » Wed Oct 28, 2009 9:13 pm

I had a friend who had a 3/4 ton Ford pickup and his truck would do that and shimmy all over the road. All is was, was a tire out of balance. You would think the whole front end was going to come out. Hope that may be the worse part of your problem.
2003 Fleetwood Providence with a 2008 Saturn Aura toad
Mrssissy
 
Posts: 39
Joined: Mon May 18, 2009 11:13 am

Re: Death rattle ....

Postby Getupngo » Wed Oct 28, 2009 9:30 pm

I figured it was alignment OR tire out of balance. Hoping so. It does it even when
all the tires have the same pressure.
Janice traveling solo in a 2008 Four Winds Windsport
Navigator: Annie the miniature poodle
2011 Honda CRV toad

Image
User avatar
Getupngo
 
Posts: 2131
Joined: Sat Jul 19, 2008 12:01 pm
Location: St. George, UT

Re: Death rattle ....

Postby Sparkle » Wed Oct 28, 2009 10:21 pm

I thought it was an alignment issue too, but it turned out to be Ball Joints. Didn't even know I had 'em! The fix worked though.
Image
User avatar
Sparkle
 
Posts: 1464
Joined: Thu Jul 17, 2008 9:34 am
Location: Fulltimer since 2006.

Re: Death rattle ....

Postby WickedLady » Wed Oct 28, 2009 10:24 pm

Sounds like it could be balance which is an easy fix. Hope that is it. Tire pressure has nothing to do with it.
WickedLady
 
Posts: 2001
Joined: Thu Dec 11, 2008 9:48 pm
Location: Long Beach, WA

Re: Death rattle ....

Postby JanetA » Wed Oct 28, 2009 10:45 pm

how does it do at higher speeds? Does it level out? just wondered.................. :?:
Image
ImageImageImage
User avatar
JanetA
 
Posts: 1023
Joined: Sat Sep 19, 2009 12:06 pm
Location: Brady , Texas

Re: Death rattle ....

Postby Getupngo » Wed Oct 28, 2009 11:20 pm

JanetA wrote:how does it do at higher speeds? Does it level out? just wondered.................. :?:


Only between 40 mph and 45 mph.
Janice traveling solo in a 2008 Four Winds Windsport
Navigator: Annie the miniature poodle
2011 Honda CRV toad

Image
User avatar
Getupngo
 
Posts: 2131
Joined: Sat Jul 19, 2008 12:01 pm
Location: St. George, UT

Re: Death rattle ....

Postby snowball » Thu Oct 29, 2009 12:42 am

Here's hoping that it gets fixed correctly!!!
good luck
sheila
snowball
 
Posts: 9501
Joined: Mon Jul 21, 2008 10:14 pm
Location: we full time right now in Quartzsite AZ

Re: Death rattle ....

Postby Nasoosie » Thu Oct 29, 2009 4:45 am

Keep us posted about this death rattle! I am very curious to see what the solution will be---I fully expect ball joints, as Sparkle mentions.
Life is about learning to dance in the rain
Happy travels!
ImageImage
User avatar
Nasoosie
 
Posts: 5525
Joined: Wed Oct 29, 2008 4:55 am

Re: Death rattle ....

Postby AlmostThere » Thu Oct 29, 2009 8:22 am

Sure hope he finds the problem and it's a quick easy fix. Let us know.
AlmostThere
 
Posts: 5411
Joined: Thu Jul 17, 2008 9:52 pm

Re: Death rattle ....

Postby retiredhappy » Thu Oct 29, 2009 8:47 am

The good thing is that you found a mechanic that actually LISTENS to you.
Karen West
Baxter, Sophie, & Bailey


..

Image
User avatar
retiredhappy
 
Posts: 4438
Joined: Sun Jul 13, 2008 9:59 pm
Location: Kerrville, Texas

Re: Death rattle ....

Postby JanetA » Thu Oct 29, 2009 10:15 am

INTERESTING.........................
Image
ImageImageImage
User avatar
JanetA
 
Posts: 1023
Joined: Sat Sep 19, 2009 12:06 pm
Location: Brady , Texas

Next

Return to General Talk

Who is online

Users browsing this forum: No registered users and 5 guests