by Sandersmr » Wed Jul 17, 2013 9:37 pm
I use the wireless I showed for back of truck to line up the hitch and ball. So I'm only going about 12-14' feet to the back of the truck. It works well enough for what I want. A wired to the back of the trailer would have the problem of how to run the wire all the way to the back. You would have to have a break with a connector somewhere. And you would still want to get out of the truck and look at what you are backing into. I think you really don't need it for backing into a site.
Something else to think about - are you going to act as a spotter for your partner when she's backing in? If so, make sure you have your directions and signals figured out beforehand. Mark and I sometimes have "disagreements" about the signals. He's a professional truck driver so he would rather me not spot - it's my trailer. Guess who wins? Also, you have to remember that you have to be where the driver can see you in the mirror - or some people use radios or cell phones. But for the driver that's just one more thing to manage.
Another thing when backing into a site, try to find a site where you won't have a huge blind spot. Unfortunately, most campgrounds I have been in have the sites angled so you are backing from the right which means you can't use the driver's mirror until you are almost straight in the site. That's where being aware of your site and any obstacles is critical.
It sounds worse than it is and with a little practice, you will be fine. Ask many of the ladies who have just started RVing recently.
Maggie, Oscar and Jasmine (and sometimes Mark)
2002 F-150 Supercrew
2010 Sportsmen Classic 16BH