by HorizonSeeker » Sat Jun 09, 2012 1:05 pm
Sharon, the curves were pretty easy. When I took the valance down I discovered that they were in 2 pieces. The old, outdated blue pattern was stapled onto a thin foam covered board that screwed into the main valance. Just had to take out a blue million screws to get that piece off, then carefully unstapled the ugly fabrice which became my pattern for the new red covering. The buttons were on the old fabric but didn't show up like they do on the red. They just screw into the thing board too. Then it just all goes back together opposite of how I took it apart.
Karen, I bought the Levor shades like on the site you mentioned only I bought them here in town at Lowes and they cut them to length for me. Using my veterans discount made the one shade $89. Only bad side is that they had to be mounted inside the valance and attached after I put the valance back up. Crazy standing on my head to screw them in place but I got it done.