Page 1 of 1

should be simple

PostPosted: Fri Mar 08, 2013 8:11 am
by jnof
I have a 2005 Itasca 38' motorhome. it should be simple to change the bedroom light bulbs but they don't want to release from socket. I don't want to force them and break the bulb in socket. Is there a release or something I am missing? These are on one side wall sconce with two small bulbs.
Thanks for any help/suggestions.

Re: should be simple

PostPosted: Fri Mar 08, 2013 9:24 am
by Sandersmr
Maybe you need to push down slightly as you twist to release. Mine you have to do that.

Re: should be simple

PostPosted: Fri Mar 08, 2013 10:25 am
by Bethers
No release on mine, just very tight and have to be pulled firmly.

Re: should be simple

PostPosted: Fri Mar 08, 2013 11:07 am
by mitch5252
Sandersmr wrote:Maybe you need to push down slightly as you twist to release. Mine you have to do that.


This is how mine come out (the small automotive type).

..