I am so frustrated. So just venting. I will try to explain the problem. But it doesn't make sense.
RED is plugged into one of our CFI outdoor plugs that should have enough power for one A/C.
RED has a 50 amp cord. This 50 amp cord is plugged directly into my 50 amp SurgeGuard RV Power Protector.
SurgeGuard plugged into a 50 amp to 30 amp pigtail adapter. Then the 30 amp is plugged into a 15 amp adaptor and the heavy duty extension cord goes from the adapter to the house.
SurgeGuard does its test cycle and says everything is OK and turns the power on to the coach. All the power in the coach works. Except when I turn on the AC. The power stays on, however, SurgeGuard is flashing "reverse polarity". So I disconnected everything. Ran a cord out to another building. Same thing. I used one of those testers in each outlet and it says the polarity is OK. So put it back to the original outlet and hooked up and same thing. The outlet ready is OK. The SurgeGuard says all is AOKAY. Then turn on the AC and SurgeGuard says reverse polarity. Turn AC off and SurgeGuard says aokay.
Will call SurgeGuard today and see what they say. Electrician will be here Tuesday to hook up a 30 amp plug for RED.